Scanning large certificates
Scanner too small? Your options are:
Some stock certificates and most bonds are too large to scan in one shot on 8½x11 or A4 scanners. If that is the case, you have four options
- ask for help from a friend who owns with an 11x17 scanner
- find a scanning service which scans 11x17 or larger documents
- scan in pieces on your scanner and stitch together using an online service
- scan in pieces on your scanner and "stitch" together with image manipulation software
I can with the fourth option.
Free "photo stitching" software
There are a handful of FREE programs that will stitch multiple scans together. For years, I recommended using Image Composite Editor (aka ICE) from Microsoft Research. It was free and worked incredibly well. I still recommend it. However, Microsoft removed the download link for ICE in 2021. There are numerous complaints in forums across the web about its demise. So far, Microsoft has not replaced it with anything else and has never given an explanation for its removal. Personally, I suspect Microsoft removed ICE because there are now several software companies that have developed their own commercial products and they complained to Microsoft about unfair competition.
Thankfully, there are a couple of sites that still provide links to download versions of ICE. Search for download "image composite editor" using Chrome and the quotes as shown.
If you cannot find any links there, search for "snapshots" of the old Microsoft page on the "Wayback Machine." These links worked in early 2022:
Wayback Machine link to old 64-bit MS ICE download
Wayback Machine link to another old 64-bit MS ICE download
If you need older 32-bit versions, you may need to search a bit longer.
Commercial "photo stitching" software
As I said, there are other commercial products out there, actually quite a few. I have tried only a couple as of this writing because I still use ICE. I discovered one required the various scans be in proper alignment during file opening. Another handled landscape "panoramas" well but failed with portrait alignments. I'm not giving names because any can post improvements tomorrow.
I beg you DO NOT COMMIT TO BUYING ANY stitching software without testing for yourself.
Photoshop and GIMP
Both Photoshop, GIMP and many other programs have capabilities for stitching images manually. Manually stitching is not terribly hard, but it is time-consuming and takes practice. Moreover, stitches are almost always noticeable.
It's very easy to stitch scans in Photoshop. Simply place your images in a folder that you can re-find easily. Then, using the top menubar, click File > Automate > Photomerge > Browse to select your files. Click OK and let Photoshop do its work. It might be advisable to close other programs to give Photoshop some computational "breathing room."
It is not easy to stitch images in GIMP but there are several tutorials on the web. Several websites suggest using Hugin (pronouned Hue-gn) with GIMP. Hugin is another free, open source program with a lot of horsepower. However, I do not recommend using Hugin to stitch scans of certificates. Hugin is built for stitching photos into panoramas. It expects images to have typical lens distortions. It is not designed to stitch scans easily AT THIS TIME. Please search for tutorials on Hugin and try for yourself. If there are any subsequent upgrades to Hugin that will allow fast stitching of scans, I hope someone will let me know.
The scanning process
Like everything else in computing, there are tricks to getting good scans of certificates, I have five suggestions for scanning large certificates in two or more pieces:
1. Remove the cover of the scanner IF POSSIBLE. If you can see black text showing through from the back, or you can see text if placed on a printed document, then you are going to get show-through and your scans are going to look yellow. Place your certificate on the scanned and cover with a piece of LIGHT gray posterboard. hold the certificate down with books stacked on top.
2. Scan at 300 dpi and save as JPGs at a quality level of about 75% to 80%. You can scan at higher resolutions if you want, but that is pretty much overkill ordinary collector purposes. Save as PNGs or TIFFs if you want to open and re-save images several times. Their files are much larger than JPGs however. It is true that JPGs degrade each time they are saved, but good programs such as Photoshop do not degrade as much as many others. Even with junk programs, JPGs are fine if you aren't going to open and re-save numerous times. Please test for yourself.
3. Scan each part of the certificate at the same resolution and with about 1.5 inches of overlap at 300 dpi. That will usually give stitching software enough information to work with. Note the ICE does NOT care how many scans you give it as long as there is sufficient overlap.
4. If scanning large certificates in pieces, always scan with tops of certificates facing the same direction relative to your scanner Direction itself doesn't matter as long as it stays the same between pieces scanned. The reason you want to do this is so light from the scanner bulb will bounce off certificates in the same direction with each scan. If you turn certificates between scans, areas of overlap will have different color properties and overlapped areas will usually be noticable.
5. If hampered by the inability to remove the scanner cover, GIVE UP. Take a photo with your smartphone camera and be satisfied. There is no reason to fold or rip a potentially valuable certificate.
The scanner below is a Plustek book edge scanner, designed to scan A4 and 8½"x11" sized books and magazines. It has a removable cover, so can be used to scan certificates. The software that comes with the scanner is designed for scanning documents and handle the inevitable shadows at the binding side. However, I have found that VueScan can control the scanner more easily than the dedicated software for certificates. It also can push its resolution to 1200 dpi. Below are two views show how to scan a large, horizontal format bond. Note that the top of the scanner was removed and the top of the bond is facing to the controls for both scans.